Battle Tanks by P. Dring

Objectives

Tanks are controlled with Little Man Computer processors. These processors are programmed with a limited number of low level instructions.

Instruction	Memory value	Description
ADD	1xx	Add the value stored at memory address xx to the value in the accumulator register
SUB	2xx	Subtract the value stored at memory address xx from the value in the accumulator register
STA	3xx	Store the value from the accumulator register to the memory address xx
LDA	5xx	Load the value from the memory address xx into the accumulator register
BRA	6xx	Branch to xx (store xx in the program counter register so that the program will jump to xx on the next instruction cycle)
BRZ	7xx	Branch if the accumulator register stores the value zero, otherwise carry on as normal
BRP	8xx	Branch if the accumulator register stores zero or a positive number
INP	9x1	Read a value from the input device x and store it in the accumulator register
OUT	9x2	Send the contents of the accumulator register to the output device x
HLT	000	Halt / Stop the processor
DAT	xxx	Stores xxx in memory to be used as data

HelpController:

Choose how your tank should be controlled: manually or by a Little Man Computer CPU

HelpRun speed:

Set how fast you want the CPU to run to control each tank.

HelpTank names:

Show or hide the name of each tank on the battle grid

HelpFuel details:

Show or hide the amount of fuel underneath each tank on the battle grid

HelpAmmo details:

Show or hide the ammount of ammo remaining under each tank on the battle grid

HelpTank command queue:

Show or hide the list of all commands for each tank

HelpGrid lines:

Show or hide the grid lines